No. 4 BSS - Strongarm II Power Clamp 2

Strongarm II Power Clamp

4prt011.gif (8032 bytes)

StrongArm II - A new power clamp for No. 4 Band Saw Sharpeners!

Fully interchangeable with existing units, the StrongArm II provides two levels of clamping pressure for smooth, uniform grinding, resulting in a sharp, precise cutting point. The saw is clamped firmly during face grinding, while reduced pressure in used for easy advancement of the saw. Spring-loaded urethane rollers keep the saw tracking in a perfectly straight line, regardless of saw gauge or amount of tension.

Materials List
Item	Qty	Part No.	Description
1	1	D-12023	Weldment, Clamp
2	1	B-12140	Arm
3	1	B-5713	Handle
4	1	9018-C150	Cap Screw, 1/2 UNF HEX HD
5	1	B-12110	Decal, "StrongArm II"
6	4	9219-C50	Set Screw, 1/2-20 UNC
7	1	B-6360	Cam Shaft Bearing
8	2	9009-C100	Cap Screw, 1/2 UNC HEX HD
9	2	9443-C50	Washer, Lock 1/2 STD.
10	1	B-12053	Bar Pivot
11	1	B-12085	Assembly, Catch
12	1	C-12018	Assembly, Faceplate
13	1	A-8589	Bearing, Cam Follower 1" DIA.
14	2	A-7058-A	Guide Assembly
15	1	D-12020	Assembly, Air Cylinder
16	2	9036-C200	Cap Screw, 1/2 UNC SKT. HD
17	3	9063-C75	Cap Screw, 5/16 NC BTN. HD
18	4	9141-C100	Set Screw, 3/8 UNC SKT. HD
19	1	9549-C300	Roll Pin, 1/4 DIA x 3" LG.
20	1	D-12068	Supply System, Air Cyl. (reference)
21	2	6554-C808	Key, Woodruff 1/4 x 1
22	1	B-12061	Shaft
23	4	9063-C50	Cap Screw, 5/16 NC BTN. HD

4prt012.gif (7141 bytes)

13624