Armstrong Anvils and Leveling Blocks

levelingBK1.gif (32916 bytes)
Mounting for Double-Faced Leveling Block For Band Saw Bench

 

Armstrong band and gang saw leveling blocks are made of solid steel, with the same hardness as cast iron, and producing the same effect on the saw. The steel blocks are absolutely free from blow holes, and are precision ground on both surfaces, providing the finest blocks on the market today. Steel trunions are furnished in each end of the block to facilitate turning.

Standard leveling blocks are furnished in the following sizes:

Width

Length

Thickness

Approx. Weight

6"

x

36"

x

3"

185 lbs.

8"

x

36"

x

4"

330 lbs.

10"

x

48"

x

4"

550 lbs.

12"

x

48"

x

4"

660 lbs.

14"

x

60"

x

5"

1200 lbs.

16"

x

60"

x

5"

1370 lbs.

leveling BLOCKS FOR CIRCULAR SAWS

Mild steel circular leveling blocks, made with the same high quality material as our band saw leveling blocks, are available for circular saws. Blocks are faced on both sides with handles for case of turning.

Sizes are available to fit saw diameter.

OTHER SIZES MADE UP TO SPECIAL ORDER

For double cut saws, blocks can be supplied with edges of one face notched out to handle saws as they wear narrower. 

GANG SAW leveling BLOCKS

leveling blocks for gang saws should be ordered to fit the size of the gang saw.

Length: 2" shorter than the length of the gang saw between tabs.
Width: Closest standard width comparing to the width of the saw (normally 6" or 8").
Thickness: 4" standard up to 4 ft. long; 5" over 4 ft. long.



MANUFACTURING COMPANY
 5504 S 11th St Ridgefield, WA 98642 USA
(503) 228-8381  Fax: (503) 228-8384
www.armstrongblue.com